JJimmy
2005-06-12 07:44:49 UTC
I have remote clients (usually up to 5) connecting to a Windows 2000
Server (SP4) via terminal services. For some reason, whenever a client
minimizes their session window to the task bar and waits a few minutes
(it seems to be between 3-5 mins), when they try to bring the window
back up from the taskbar, it just shows a black screen and then
eventually displays the message "The connection to the remote computer
was broken. This may have been caused by a network error. Please try
connecting to the remote computer again." I have read the posts about
enabling keep alives and setting the keep alive interval and time-- I
have done all of this on the server, and yet I still continue to
experience the issue. I have double and triple checked to make sure the
settings were set correct in the registry. I also have TS set to never
disconnect idle sessions. After searching for hours, I've run across
quite a few people with this issue, but the only solution anyone ever
seems to have is the keep-alive fix. Unfortunately, that doesn't seem
to be making any difference. I've also seen a few posts mentioning
screen savers causing a problem, but there isn't one enabled on the
client or the server. I also checked the router to see if there was
anything strange in the settings. It's a Linksys BEFSX41, updated
firmware, and there is no setting anywhere for killing a connection
that appears idle (even though keep alive is enabled, I've seen people
mention this as a possible isssue in other posts). I'm really at a loss
for why this is happening, since I've done just about everything I can
think of to keep the connection active, yet it still disconnects if and
only if the window is minimized to the task bar. I've brought up
sessions on machines where the remote desktop window stays maximized,
walked away for two hours and come back with it running just fine (no
disconnects). I've run ping tests of varying sizes against the router
without any drops. The terminal server is set up in the DMZ, so port
forwarding isn't an issue. If anyone has experienced a problem similar
to this and has any suggestions for something to try, I'd really
appreciate it, since I'm about out of ideas. Thanks!
Server (SP4) via terminal services. For some reason, whenever a client
minimizes their session window to the task bar and waits a few minutes
(it seems to be between 3-5 mins), when they try to bring the window
back up from the taskbar, it just shows a black screen and then
eventually displays the message "The connection to the remote computer
was broken. This may have been caused by a network error. Please try
connecting to the remote computer again." I have read the posts about
enabling keep alives and setting the keep alive interval and time-- I
have done all of this on the server, and yet I still continue to
experience the issue. I have double and triple checked to make sure the
settings were set correct in the registry. I also have TS set to never
disconnect idle sessions. After searching for hours, I've run across
quite a few people with this issue, but the only solution anyone ever
seems to have is the keep-alive fix. Unfortunately, that doesn't seem
to be making any difference. I've also seen a few posts mentioning
screen savers causing a problem, but there isn't one enabled on the
client or the server. I also checked the router to see if there was
anything strange in the settings. It's a Linksys BEFSX41, updated
firmware, and there is no setting anywhere for killing a connection
that appears idle (even though keep alive is enabled, I've seen people
mention this as a possible isssue in other posts). I'm really at a loss
for why this is happening, since I've done just about everything I can
think of to keep the connection active, yet it still disconnects if and
only if the window is minimized to the task bar. I've brought up
sessions on machines where the remote desktop window stays maximized,
walked away for two hours and come back with it running just fine (no
disconnects). I've run ping tests of varying sizes against the router
without any drops. The terminal server is set up in the DMZ, so port
forwarding isn't an issue. If anyone has experienced a problem similar
to this and has any suggestions for something to try, I'd really
appreciate it, since I'm about out of ideas. Thanks!