Discussion:
Disable disconnect
(too old to reply)
Ron Bromwell
2005-04-28 19:32:11 UTC
Permalink
How do I disable the disconnect option for terminal service users. I was able
to set the policy under user configuration so they can not shutdown or
restart the server, but I want to stop them from disconne3cting sessions and
tying up resources.

Thanks,
Ron
Vera Noest [MVP]
2005-04-28 19:48:02 UTC
Permalink
You cannot totally prevent users from disconnecting (they can
always just turn off their clients, or unplug the network cable),
but you can make life hard for them :-)
One approach is to put a short time-out limit on disconnected
sessions, and have the sessions reset automatically when the time-
out limit is reached. With this configuration, there is nothing to
be gained by disconnecting, since the session will be gone the next
time the user tries to reconnect. Note that resetting a session
will cause all data that has not been saved to be lost, so be sure
to inform your users before you implement this!

The other thing you can do is hack the rdp client to get rid of the
X-box in the rdp window. Detailed information here:

Disabling the X box on the Terminal Services client
http://terminal.servebeer.com/php/x_box_disable.php

--
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
http://hem.fyristorg.com/vera/IT
--- please respond in newsgroup, NOT by private email ---

=?Utf-8?B?Um9uIEJyb213ZWxs?=
Post by Ron Bromwell
How do I disable the disconnect option for terminal service
users. I was able to set the policy under user configuration so
they can not shutdown or restart the server, but I want to stop
them from disconne3cting sessions and tying up resources.
Thanks,
Ron
Mark B
2005-07-25 13:32:02 UTC
Permalink
Can I reply here with the opposite request? :)

I want my users accounts to AUTOMATICALLY reset about a minute after they
disconnect. I have set this up in each users account as well as in the
orveride for all account, but on most of my account, it does not reset them.
People remain simply disconnect for days sometimes. This really can screw up
printer reconnection. Is there something I am missing?

Thanks!
Vera Noest [MVP]
2005-07-25 13:39:01 UTC
Permalink
Check if this helps:

890864 - Some idle session Group Policy settings do not work if you
try to use them on a Microsoft Windows XP Professional-based computer
that is in a domain environment
http://support.microsoft.com/?kbid=890864

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
Can I reply here with the opposite request? :)
I want my users accounts to AUTOMATICALLY reset about a minute
after they disconnect. I have set this up in each users account
as well as in the orveride for all account, but on most of my
account, it does not reset them. People remain simply disconnect
for days sometimes. This really can screw up printer
reconnection. Is there something I am missing?
Thanks!
Mark B
2005-07-25 13:47:06 UTC
Permalink
My users all have Windows 2000 Pro on their workstations and use RDC to
connect. The Terminal Server is Windows 2003 Server. Should this still apply?

THANKS for the quick response! MB
Post by Vera Noest [MVP]
890864 - Some idle session Group Policy settings do not work if you
try to use them on a Microsoft Windows XP Professional-based computer
that is in a domain environment
http://support.microsoft.com/?kbid=890864
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
Can I reply here with the opposite request? :)
I want my users accounts to AUTOMATICALLY reset about a minute
after they disconnect. I have set this up in each users account
as well as in the orveride for all account, but on most of my
account, it does not reset them. People remain simply disconnect
for days sometimes. This really can screw up printer
reconnection. Is there something I am missing?
Thanks!
Vera Noest [MVP]
2005-07-25 14:20:16 UTC
Permalink
Then we try another one :-) I was really looking for this one, but
couldn't find at first.

832088 - Windows Server 2003 Terminal Server ignores the idle
disconnect settings in a user profile
http://support.microsoft.com/?kbid=832088

This hotfix is included in SP1.

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
My users all have Windows 2000 Pro on their workstations and use
RDC to connect. The Terminal Server is Windows 2003 Server.
Should this still apply?
THANKS for the quick response! MB
Post by Vera Noest [MVP]
890864 - Some idle session Group Policy settings do not work if
you try to use them on a Microsoft Windows XP
Professional-based computer that is in a domain environment
http://support.microsoft.com/?kbid=890864
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
Can I reply here with the opposite request? :)
I want my users accounts to AUTOMATICALLY reset about a
minute after they disconnect. I have set this up in each
users account as well as in the orveride for all account, but
on most of my account, it does not reset them. People remain
simply disconnect for days sometimes. This really can screw
up printer reconnection. Is there something I am missing?
Thanks!
Mark B
2005-07-25 14:47:17 UTC
Permalink
Well, hotfix and SP1 were both done.

I will redo the hotfix, but any other thoughts?

MB
Post by Vera Noest [MVP]
Then we try another one :-) I was really looking for this one, but
couldn't find at first.
832088 - Windows Server 2003 Terminal Server ignores the idle
disconnect settings in a user profile
http://support.microsoft.com/?kbid=832088
This hotfix is included in SP1.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
My users all have Windows 2000 Pro on their workstations and use
RDC to connect. The Terminal Server is Windows 2003 Server.
Should this still apply?
THANKS for the quick response! MB
Post by Vera Noest [MVP]
890864 - Some idle session Group Policy settings do not work if
you try to use them on a Microsoft Windows XP
Professional-based computer that is in a domain environment
http://support.microsoft.com/?kbid=890864
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
Can I reply here with the opposite request? :)
I want my users accounts to AUTOMATICALLY reset about a
minute after they disconnect. I have set this up in each
users account as well as in the orveride for all account, but
on most of my account, it does not reset them. People remain
simply disconnect for days sometimes. This really can screw
up printer reconnection. Is there something I am missing?
Thanks!
Vera Noest [MVP]
2005-07-25 20:36:25 UTC
Permalink
Not really.
I would however minimize the administrative overhead, by
configuring this setting only in one place: through a Group Policy.
That makes troubleshooting a lot easier, since you can easily
verify if the policy is affecting a certain user or not (with the
Resultant Set of Policies). It also means that you can apply the
same GPO to more than one Terminal Server, without having to redo
all the settings on each new TS.

With you current configuration, is there anything different between
the users who are getting disconnected, and those who aren't?
Is there anything in the eventlog on the TS?

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
Post by Mark B
Well, hotfix and SP1 were both done.
I will redo the hotfix, but any other thoughts?
MB
Post by Vera Noest [MVP]
Then we try another one :-) I was really looking for this one,
but couldn't find at first.
832088 - Windows Server 2003 Terminal Server ignores the idle
disconnect settings in a user profile
http://support.microsoft.com/?kbid=832088
This hotfix is included in SP1.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
My users all have Windows 2000 Pro on their workstations and
use RDC to connect. The Terminal Server is Windows 2003
Server. Should this still apply?
THANKS for the quick response! MB
Post by Vera Noest [MVP]
890864 - Some idle session Group Policy settings do not work
if you try to use them on a Microsoft Windows XP
Professional-based computer that is in a domain environment
http://support.microsoft.com/?kbid=890864
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by Mark B
Can I reply here with the opposite request? :)
I want my users accounts to AUTOMATICALLY reset about a
minute after they disconnect. I have set this up in each
users account as well as in the orveride for all account,
but on most of my account, it does not reset them. People
remain simply disconnect for days sometimes. This really
can screw up printer reconnection. Is there something I am
missing?
Thanks!
Mark B
2005-07-25 16:27:03 UTC
Permalink
Which means that, these hotyfixes were already in place, and it is not
working...

Any other thoughts?
Loading...