Discussion:
Remote Desktop Connection - pls help
(too old to reply)
vdz
2006-06-09 12:25:02 UTC
Permalink
Hi

I am trying to use RDC in the Netware Environment. Most of Pcs are Wins 2K
Pro and couple of Wins XP Pro.
I have tried connecting between 2 Wins 2K based pcs with Termnial Service
client installed, NO connection the error message :

"The client could not connect to the remote computer. Remote connections
might not be enabled or the computer might be too busy to accept new
connections. It is also possible that network problems are preventing your
connection. Please try your connection again later. If the problem continues
to occur, contact your administrator."

Can I use a Wins XP Pro pc to connect a Wins 2k Pro with TS client installed?
Please tell me the better solution.
Any help would be much appreciated

Regards
Vera Noest [MVP]
2006-06-09 13:13:37 UTC
Permalink
From http://ts.veranoest.net/ts_faq.htm

Q. How can I Remote Control my Windows 2000 Professional client?

A. You can't do this with the Remote Desktop Protocol client. A
Windows 2000 Professional workstation can only be an rdp client,
not a host.
Use NetMeeting or VNC instead to connect to your W2K Pro desktop.

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by vdz
Hi
I am trying to use RDC in the Netware Environment. Most of Pcs
are Wins 2K Pro and couple of Wins XP Pro.
I have tried connecting between 2 Wins 2K based pcs with
Termnial Service client installed, NO connection the error
"The client could not connect to the remote computer. Remote
connections might not be enabled or the computer might be too
busy to accept new connections. It is also possible that network
problems are preventing your connection. Please try your
connection again later. If the problem continues to occur,
contact your administrator."
Can I use a Wins XP Pro pc to connect a Wins 2k Pro with TS
client installed? Please tell me the better solution.
Any help would be much appreciated
Regards
vdz
2006-06-09 23:21:01 UTC
Permalink
Thank you for your reply. I am trying to minimize the budget i.e not spend
money on licence since wth VNC we have to pay per servers :)
Anyway much appreciated.

Regards

vdz
Post by Vera Noest [MVP]
From http://ts.veranoest.net/ts_faq.htm
Q. How can I Remote Control my Windows 2000 Professional client?
A. You can't do this with the Remote Desktop Protocol client. A
Windows 2000 Professional workstation can only be an rdp client,
not a host.
Use NetMeeting or VNC instead to connect to your W2K Pro desktop.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by vdz
Hi
I am trying to use RDC in the Netware Environment. Most of Pcs
are Wins 2K Pro and couple of Wins XP Pro.
I have tried connecting between 2 Wins 2K based pcs with
Termnial Service client installed, NO connection the error
"The client could not connect to the remote computer. Remote
connections might not be enabled or the computer might be too
busy to accept new connections. It is also possible that network
problems are preventing your connection. Please try your
connection again later. If the problem continues to occur,
contact your administrator."
Can I use a Wins XP Pro pc to connect a Wins 2k Pro with TS
client installed? Please tell me the better solution.
Any help would be much appreciated
Regards
Vera Noest [MVP]
2006-06-10 19:10:41 UTC
Permalink
There are lots of free VNC solutions. Here's one of them:

http://ultravnc.sourceforge.net/
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
Post by vdz
Thank you for your reply. I am trying to minimize the budget i.e
not spend money on licence since wth VNC we have to pay per
servers :) Anyway much appreciated.
Regards
vdz
Post by Vera Noest [MVP]
From http://ts.veranoest.net/ts_faq.htm
Q. How can I Remote Control my Windows 2000 Professional
client?
A. You can't do this with the Remote Desktop Protocol client. A
Windows 2000 Professional workstation can only be an rdp
client, not a host.
Use NetMeeting or VNC instead to connect to your W2K Pro
desktop.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by vdz
Hi
I am trying to use RDC in the Netware Environment. Most of
Pcs are Wins 2K Pro and couple of Wins XP Pro.
I have tried connecting between 2 Wins 2K based pcs with
Termnial Service client installed, NO connection the error
"The client could not connect to the remote computer. Remote
connections might not be enabled or the computer might be too
busy to accept new connections. It is also possible that
network problems are preventing your connection. Please try
your connection again later. If the problem continues to
occur, contact your administrator."
Can I use a Wins XP Pro pc to connect a Wins 2k Pro with TS
client installed? Please tell me the better solution.
Any help would be much appreciated
Regards
vdz
2006-06-11 01:03:02 UTC
Permalink
That is really helpful. Thanks a lot for that.

Regards
Post by Vera Noest [MVP]
http://ultravnc.sourceforge.net/
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
Post by vdz
Thank you for your reply. I am trying to minimize the budget i.e
not spend money on licence since wth VNC we have to pay per
servers :) Anyway much appreciated.
Regards
vdz
Post by Vera Noest [MVP]
From http://ts.veranoest.net/ts_faq.htm
Q. How can I Remote Control my Windows 2000 Professional
client?
A. You can't do this with the Remote Desktop Protocol client. A
Windows 2000 Professional workstation can only be an rdp
client, not a host.
Use NetMeeting or VNC instead to connect to your W2K Pro
desktop.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
*----------- Please reply in newsgroup -------------*
Post by vdz
Hi
I am trying to use RDC in the Netware Environment. Most of
Pcs are Wins 2K Pro and couple of Wins XP Pro.
I have tried connecting between 2 Wins 2K based pcs with
Termnial Service client installed, NO connection the error
"The client could not connect to the remote computer. Remote
connections might not be enabled or the computer might be too
busy to accept new connections. It is also possible that
network problems are preventing your connection. Please try
your connection again later. If the problem continues to
occur, contact your administrator."
Can I use a Wins XP Pro pc to connect a Wins 2k Pro with TS
client installed? Please tell me the better solution.
Any help would be much appreciated
Regards
Loading...